Lutron NOVA
Price: $30.00 More detail | Buy it
| |
"Nova t incandescent single pole slide-to-off dimmers are available in 600,1000, 1500, or 2000 watt capacity. To be used for quartz and incandescent lamps only."
|
|
Lutron Maestro
Price: $31.13 More detail | Buy it
| |
"Preset incandescent smart dimmers come as 600 or 1000 watts, single-pole/multi-location."
|
|
Lutron Glyder
Price: $31.50 More detail | Buy it
| |
"Glyder slide-to-off low voltage magnetic dimmer is single pole, 450 watts."
|
|
Grafix Eye 3000 Series 2-Zone Preset Dimming Control Unit
Price: $492.00 More detail | Buy it
| |
Lutron GRX-3102 Grafik Eye Incandescent / Magnetic Low Voltage / Neon / Cold-Cathode / Tu-Wire Fluorescent 2-Zone Control Unit
|
|
Lutron Claro
Price: $25.50 More detail | Buy it
| |
"Claro gfci (ground fault circuit interrupter) receptacle is 15 amps, 125 volts."
|
|
Lutron Claro
Price: $5.25 More detail | Buy it
| |
"Claro single line telephone jack is a 6-conductor jack, but will also accept most 4-conductor plugs."
|
|
Lutron Diva
Price: $66.00 More detail | Buy it
| |
"Diva preset incandescent dimmers with nightlight feature single pole options, 600 or 1000 watt. Wallplates sold separately."
|
|
Lutron Diva
Price: $23.25 More detail | Buy it
| |
"Diva preset incandescent dimmers with nightlight feature single pole or 3-way options, 600 or 1000 watt. Wallplates sold separately."
|
|
Lutron Glyder
Price: $11.63 More detail | Buy it
| |
"Glyder preset incandescent dimmers come as single-pole or 3-way, 600 or 1000 watts."
|
|
Grafix Eye 3000
Price: $787.50 More detail | Buy it
| |
"Can link up to 8 GRAFIK Eye Control Units (8 addresses) for up to 48 zones. Up to 16 Accessory Controls for total of 24 control points Built-in Infrared Receiver/Optional Infrared Wireless Remote Control Can increase individual zone capacities to 30,000 W/VA at 120V/277V Power Interfaces are necessary for Fluorescent (GRX-FDBI) and Electronic Low Voltage (GRX-ELVI). Power Interfaces are not required with HP 2-4-6 Dimming Module. GRX-TVI Provides a 0-10V output that conforms to BSI 929. Can be used to switch all lighting loads, including metal halide and electronic ballasts. If switching other non-lighting loads, use a relay by others. System requires interface at 230V."
|
|
|
